Home Product

Other Products

Tubes Etc

Showing 1–16 of 94 results

View Details Select options
Ready to use adhesive. Bonds to wood, brick, plasterboard, metal, glass, ceramic and most common surfaces inside and out. Great for bonding architrave, skirting etc splashbacks and magnetic boards Important - Do not use on damp surfaces, as a mirror adhesive or on polystyrene/styrofoam/expaned polyurethane. Any heavy materials (more than 8kg/square metre) must be supported for 8-24hours depending on size of item. Solvents may attack sensitive plastics. Please test a small area first.   Evostik tube - 30g Evostik Tin - 500ml

Adhesive

£14.04£20.23
View Details Select options
Aluminium Angle 6063T6 is an angle shaped 6063 Aluminium Alloy. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best-suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes.

ALUMINIUM 6063T6 ANGLE

£31.83£117.62
View Details Select options
Aluminium Angle 6082T6 is an angle shaped 6082 Aluminium Alloy. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility

ALUMINIUM 6082 ANGLE

£0.00£396.24
View Details Select options
Aluminium Channel 6063T6 is a channel shaped 6063 Aluminium Alloy. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes.  
Specifications BS EN 573-3 Characteristics Weldability – Gas: Good Weldability – Arc: Very Good Weldability – Resistance: Good Brazability: Very Good Solderability: Good Workability - Cold: Average (Acceptable) Machinability: Good Uses Common uses of Aluminium Channel 6063T6 include: Architectural Applications Extrusions Window Frames Doors Shop Fittings Irrigation Tubing More Info Density: 2.70 g/cm³ Melting Point: 655 °C Thermal Expansion: 23.5 x10^-6 /K Modulus of Elasticity: 69.5 GPa Thermal Conductivity: 201 W/m.K Electrical Resistivity: 0.033 x10^-6 Ω .m Electrical Resistivity: 52 % IACS

Aluminium Channel 6063T6

£133.66£309.71
View Details Select options
Aluminium Flat Bar 6063T6 is a flat shaped 6063 Aluminium Alloy bar. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes.

Aluminium Flat Bar 6063T6

£23.10£118.58
View Details Select options
Aluminium Angle 6082T6 is a flat shaped 6082 Aluminium Alloy bar. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Aluminium Flat Bar 6082T6

£23.70£273.84
View Details Select options
Aluminium Hexagon Bar 6082T6 is a hexagonal shaped 6082 Aluminium Alloy bar. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Aluminium Hexagon Bar 6082T6

£0.00£112.86
Product Weight: 15kg
View Details Select options
Aluminium Round Tube 6063T6 is a tubular shaped 6063 Aluminium Alloy. This alloy is commonly referred to as the architectural alloy. Developed as an extrusion alloy, 6063 Aluminium Alloy has relatively high tensile properties, excellent finish characteristics and high corrosion resistance. It is one of the best suited alloys for anodizing applications including hard coat anodizing for air cylinder tubes

Aluminium Round Tube 6063T6

£21.13£51.63
View Details Select options
Aluminium Round Tube 6082T6 is a round tubular shaped 6082 Aluminium Alloy. This alloy is in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series. 6082 Aluminium Alloy is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting. It can also be forged and clad, but that is not common practice with this alloy. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Aluminium Round Tube 6082T6

£24.94£55.64
View Details Select options
900W Angle Grinder - 115mm. 3-position auxiliary handle increases user comfort and adapts to multiple work angles. Includes 2 separate guards for use with cutting and grinding discs. No load speed 11,000rpm. Soft-grip handle and 2 stage on/off switch. Please note that the discs shown are sold separately. If you require discs just add the quantity of the product you need shown in the menu below, to your shopping cart. We also have backing pads, pin spanners and flange sets for you to purchase. Please note that the products supplied may differ from the product images shown but will be of an equal or higher quality. We would also like to point out that in some instances the delivery time on our tools may be longer than our standard delivery time of 3 to 5 days.

Angle Grinder and Discs

£11.45£75.90
View Details Select options
The Ankerbolt is a grade 8.8 self tapping anchor for use in a variety of base materials. The self-tapping action provides a positive anchorage in concrete, brick, stone & blocks, and it performs well in both solid & hollow material.

Ankerbolt Fasteners

£8.28£82.80
View Details Select options
Brass Angle CZ121 is an angle shaped CZ121 Brass Alloy. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion. CZ121 (CW614N) Free Machining
  • Brass Corrosion Resistance: Excellent Cold Working: Poor Hot Working: Excellent Heat Treatment: Good Machinability: Excellent Weldability: Excellent Common uses of Brass Angle CZ121 include: High Speed Machined Components Architectural Extrusions Locks
  • Hinges Density = 8.47 g/cm³ Melting Point = 875 °C Thermal Expansion = 20.9 x10^-6 /K Modulus of Elasticity = 97 GPa Thermal Conductivity = 123 W/m.K Electrical Resistivity = 0.062 x10^-6 Ω .m Proof Stress = 220 - 350 MPa Tensile Strength-360 - 500 MPa Hardness Brinell = 90 - 160 HB Elongation A = 20 - 5 %

Brass Angle CZ121

£0.00£283.84
View Details Select options
Brass Angle CZ130 is an angle shaped CZ130 Brass Alloy. CZ130/CW624N Brass Alloy is a machinable brass with an attractive yellow lustre. CZ130/CW624N Brass Alloy is a duplex or alpha/beta alloy. CZ130 (CW624N) Yellow Brass
  • Corrosion Resistance: Good Cold Working: Fair Hot Working: Excellent Machinability: Good Weldability: Excellent Common uses of Brass Angle CZ130 include: Shopfittings Machine Parts Instruments Electrical Appliances Hinges More Info Density = 8.44 g/cm³ Melting Point = 890 °C Thermal Conductivity = 109 W/m.K Proof Stress = 150 - 220 MPa Tensile Strength = 350 - 420 MPa Elongation A50 mm = 20 - 30 % Hardness Vickers = 90 - 120 HV

Brass Angle CZ130

£0.00£195.11
View Details Select options
Brass Channel CZ121 is an channel shaped CZ121 Brass Alloy. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion.   • Specifications CZ121 (CW614N) Free Machining Brass • Characteristics o Corrosion Resistance: Excellent o Cold Working: Poor o Hot Working: Excellent o Heat Treatment: Good o Machinability-Excellent o Weldability-Excellent • Uses Common use of Brass Channel CZ121 include: o High Speed Machined Components o Architectural Extrusions o Locks o Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Channel CZ121

£0.00£256.96
Product Weight: 15kg
View Details Select options
Brass Half Round Bar CZ121 is a semi-circle shaped CZ121 Brass Alloy bar. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion. CZ121 (CW614N) Free Machining Brass • Corrosion Resistance: Excellent • Cold Working: Poor • Hot Working: Excellent • Heat Treatment: Good • Machinability: Excellent • Weldability: Excellent Common uses of Brass Half Round Bar CZ121 include: • High Speed Machined Components • Architectural Extrusions • Locks • Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Half Round Bar CZ121

£0.00
Product Weight: 15kg
View Details Select options
Brass Hexagon Bar CZ121 is a hexagonal shaped CZ121 Brass Alloy bar. CZ121 Brass Alloy is a free-machining brass consisting of a duplex phase structure with a 3% lead content. It is suited to high speed machining operations due its superior machinability, thread rolling and knurling characteristics. Particles of lead are finely dispersed throughout the microstructure, acting as both a lubricant and a chip breaker to give the alloy its free-machining characteristics. CZ121 Brass Alloy’s machinability rating of 100 is the standard against which all copper alloys are rated. It offers good strength, is easily soldered or brazed and has good resistance to corrosion. • Specifications CZ121 (CW614N) Free Machining Brass • Characteristics o Corrosion Resistance: Excellent o Cold Working: Poor o Hot Working: Excellent o Heat Treatment: Good o Machinability: Excellent o Weldability: Excellent • Uses Common uses of Brass Hexagon Bar CZ121 include: o High Speed Machined Components o Architectural Extrusions o Locks o Hinges • More Info o Density = 8.47 g/cm³ o Melting Point = 875 °C o Thermal Expansion = 20.9 x10^-6 /K o Modulus of Elasticity = 97 GPa o Thermal Conductivity = 123 W/m.K o Electrical Resistivity = 0.062 x10^-6 Ω .m o Proof Stress = 220 - 350 MPa o Tensile Strength = 360 - 500 MPa o Hardness Brinell = 90 - 160 HB o Elongation A = 20 - 5 %

Brass Hexagon Bar CZ121

£59.59£393.88
Product Weight: 25kg
0